Home Electric Vehicle Charger 32A 7KW Level 2 EV Car Charging Station 28FT Cable

Description

Store category
Sign Up Now !
You may also like
Home Electric Vehicle Charger 32A 7KW Level 2 EV Car Charging Station 28FT Cable
Product Description
Description:
This EV car charging station is your reliable partner for fast charging of electric vehicles. It can be installed in your garage or anywhere in your home. With built-in overcurrent and leakage current protection, it can be installed as a stand-alone unit to ensure your safety.
This 32A AC charging station can help your electric car charge stably and quickly. The inductive magnetic card charging design makes it your exclusive charging station. It supports various environments and is an essential charging tool for all SAE J1772 standard, 110V 60Hz plug-in electric vehicles.
Feature:
Stable and Fast Charging
This EV home charging station usually takes about 7 hours to fully charge an electric car, it usually can travel 50-100 kilometers per hour on average, bringing you long battery life.
Smart Swipe Charging
Equipped with an inductive magnetic card, you can control the charging switch by swiping the card, making the charging station your exclusive, even if it is installed outdoors, it will not be charged by anyone.
28FT Cable
The cable length of the charging station is 28FT, which is long enough to be used in various parking lots or family garages. The quality is certified by TÜV, it is sturdy and durable, and it is not easy to be damaged.
Suitable for Indoor/Outdoor
Strict waterproof protection (IP65) makes the EV charging pile suitable for various indoor and outdoor places. Even if it is used in rainy days, it will not damage the equipment, will not leak electricity, and have excellent safety protection functions.
10 Safety Protection
Waterproof protection(IP65), lightning protection, over voltage protection, under voltage protection, grounding protection, overload protection, over temperature protection, short circuit protection, low temperature protection, leakage protection.
Well-Designed
The unit itself is in a neat, slim package that doesn't take up much space on the wall. The hook is designed to accommodate cables, and the special socket effectively prevents dust from entering the EV charger interface. Press the reset button to turn off the device in an emergency.
Easy to Install & Use
The blue board design and cable hook make charging easy. Dedicated socket can effectively protect the interface from dust. 28FT cable（TÜV approved）is sturdy & durable, and is not stiff when mobile connection is charged. Its length is very suitable for garages, especially for family use.
Wide Application
Compatible with all SAE J1772 electric vehicles and plug-in hybrid electric vehicles sold in North America.
Specification:
Maximum Power: 7KW
Output Current: 32A
Input Power: 110V
Input Frequency: 60Hz
Standby Power Consumption: 6W
Safety Protection: 10 types
Safety Certification: TÜV Approved
Shell Material: Galvanized steel body & Tempered glass panel
Waterproof Level: IP65
Cable Length: 8.5m/28ft
Working Altitude: <2000m
Working Humidity: 5% ~ 95% without condensation
Working Temperature: -22℉-131℉ /-30℃ ~ +55℃
Applicable Scene: Indoor/Outdoor
Standards Compliant: SAE_J1772
Main Unit Structure:
Backboard Design
Enlarge the contact area to prevent falling and protect the equipment.
Dedicated Socket
The dedicated socket can effectively protect the interface from dust and water.
Reset Button
In emergency use, press the button to turn off the device, please rest assured to use.
Cable Hook
Easy to use and organize, making charging easier.
LED Indicator:
The color and dynamics of the LED indicator convey the working status of charging to you, effectively protecting the charger and the vehicle. For specific content, you can refer to the detailed description of the LED indicator light in the manual, or you can ask us questions.
Operation of Charging:
1.Insert the EV charger (connect the charging plug)
2.Start charging:
Method 1: Plug the charger and start charging;
Method 2: Use the designated charging card to swipe.
The green light flashes :indicating normal charging.
Swipe the card again to end charging.
Method 1: Pull out the charger to end
the charging;
Method 2: Swipe the card again to end the charging
Put the EV charger back to its place
Note:
For the first installation, attention should be paid to the power cable according to IN-L (fire), IN-N (zero), PE (ground) one by one, and the fire wire and zero wire cannot be reversed.
PE (ground wire) needs to be grounded reliably.
Making sure the emergency stop switch is activated after power on.
Before charging, make sure that the tip of the charging gun is free from stains and water.
It is prohibited to place the charging pile inside the car when charging.
Package Included:
1 * Electric Vehicle Charging Station
1 * SAE J1772 Charger
1 * Cable Hook
1 * Wall-mounted Backboard
8 * Screws
8 * Screws Plastic Tubes
1 * User Manual
1 * Packing Box
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept payment through PayPal only, this is easy and the most preferred way.
Please kindly
make a payment within 3 days
after you won this item.
Please note your shipping address must match your PAYPAL address.
Delivery details
Item will
be shipped within 3-5 days
of receiving full payment.
We will ship your order to your PayPal Verified address provided.
Please verify your address and make sure that it is your current address before making your payment.
We do not include invoice with our shipments.If you need invoice,please leave us your email,we will send the invoice to your email.
We offer free domestic shipping via FedEx or UPS on every order if your order location is in our US warehouse.
Terms of sales
All our products are free and fast shipping.But this do not include the duties.According to ebay's rules,
it is buyer's responsibility to make clearance and pay for the import tax.
1. We provide 30 days return upon the buyer received the item.
2. We
ONLY
accept the return with all original package. Please make sure the item have
NO
man-made sabotage.
3. The buyer will be required to pay for the return shipping label if you changed your mind or no longer need the item(s) or found a better price.
4.
The buyer is responsible for the correctness of the shipping address.
If the package is returned to the sender due to the buyer's error (such as an insufficient address, delivery failure, forward failure, etc.), we will deduct the original shipping cost in the refund.
About us
We work for a Positive Feedback, and we would like to offer a great customer service. If you have any problem please leave us message at any time.
Business Hours 9:00AM to 6:00PM Monday to Friday.
Contact us
Send us a message on eBay and we will answer within 24h on business days.
Feedback